www.muesch-online.com D.R.G.M.


	D.R.G.M. No. 6 050 June 27, 1892 Eduard Müller, Solingen Description: Corkscrew with head-shaped cap. Material: steel Markings: none Remark:


	D.R.G.M. No. 6 145 June 27, 1892 Edmund Jansen, Höhscheid Description: Sliding corkscrew that retractsinto the sheath that also serves as a handle. Material: Steel Markings: G.M.PATENT No 6145 Remark:


	D.R.G.M. No. 7 609 August 28, 1892 E. Becker, Solingen Description: Corkscrew with split frame and sliding ring to hold the frame together. Material: steel, wood Markings: G.M. N^o 7609 COLUMBUS Remark: Manufactured only for a short period between August 29, 1892 and March 7, 1893 until the patent has been granted.


	D.R.G.M. No. 10 975 January 20, 1893 C. CH. Neues, Oberschönau Description: Framed corkscrew with hidden spring and a collar on the end of the shank to hold the frame Material: Steel, wood Markings: none Remark:


	D.R.G.M. No. 10 985 January 19, 1893 Thill & Küll, Solingen Description: Pocket corkscrew with champagne wire cutter. Material: Steel Markings: G.M.S. No. 10985 Remark:

new


	D.R.G.M. No. 30 676 September 11, 1894 Karl Häfner, F. Sohn, Steinbach-Hallenberg Description: Corkscrew with folding, hollow, hinged arms Material: Steel Markings: none Remark:


	D.R.G.M. No. 35 418 January 14, 1895 W. Sommers, Schmalkalden Description: Spring barrel with locking device. Material: Steel, brass, wood Markings: none Remark: registered again after the first 3 years had expired D.R.G.M. No. 114369 April 11, 1899 W. Sommers, Schmalkalden


	D.R.G.M. No. 35 629 January 17, 1895 Carl Ullrich, Oberschönau i. Th. Description: The pillars of the open frame are encircled by springs that extend from the neck ring to the shoulder of the corkscrew. Material: Steel, wood Markings: none Remark:


	D.R.G.M. No. 36 019 January 26, 1895 Otto Voigt, Lübeck Description: Safety corkscrew with india rubber inside the hollow part of the neck ring. Material: Steel, india rubber Markings: none Remark:


	D.R.G.M. No. 76 642 May 26, 1897 Eduard Becker, Solingen Description: The scale of the waiters' friend is bent from one piece of steel. Material: Steel Markings: D.R.G.M. N^o 76642 Remark:


	D.R.G.M. No. 82 205 Sept. 4, 1897 Ernst Steinfeld, Solingen Description: Pocket corkscrew with knife or other tools added to the ends of the handles. Material: steel, celluloid Markings: D.R.G.M. 82205 Remark: Made in two colours: brown and red-brown


	D.R.G.M. No. 84 075 May 26, 1897 W. Sommers, Schmalkalden Description: Corkscrew with conical fork above the worm. Material: Steel, wood Markings: none Remark:


	D.R.G.M. No. 93 678 April 4, 1898 March 20, 1901 Gustav Kürschner, Schmalkalden Description: Spring barrel corkscrew with a hinge jointed clip above the frame to prevent the barrel from sliding upward. Material: Steel, Wood Markings: D.R.G.M. 93678 Remark:


	D.R.G.M. No. 96 377 May 06, 1898 Georg Giessler, Herges Hallenberg Description: Corkscrew with a sliding tube around the shaft to lock the frame to the shaft Material: Steel, wood Markings: none Remark: one of three different type of the sliding tube


	D.R.G.M. No. 99 881 July 26, 1898 G.A. Pfeffer and M.W. Weber, Steinbach-Hallenberg Description: Corkscrew with bullet-shaped sheath. The sheath serves as a grip when in use. Material: steel, brass Markings: DRGM 99881 Remark:


	D.R.G.M. No. 109 374 January 14, 1899 Richard Recknagel, Steinbach-Hallenberg Description: Corkscrew with a spring barrel with obliquely slotted tube to lock the barrel to the shank Material: Steel, wood Markings: D.R.G.M. 109374 Remark:


	D.R.G.M. No. 130 884 February 24, 1900 H. & W. Batafy, Berlin Description: Corkscrew with tools attached to the handle Material: Steel Markings: Patent 3347 D.R.G.M. 130884 Remark: english Patent No. 3347 from February 20, 1900 granted to Sydney Flowers of Richmond


	D.R.G.M. No. 146 827 Nov. 30, 1930 H. Berns, Solingen, Ziegelstr. 3 Description: Case with several tools. The tools can be attached in two ways to the handle. Material: Steel, Aluminum, Horn/Bone Markings: Bonsa D.R.G.M. 146827 REGISTERED Remark: From 1903 until 1906 lengthenth by Böntgen and Sabin of Solingen


	D.R.G.M. No. 152 004 Mar. 23, 1901 Ernst Scharff, Frankfurt a. M. Description: Corkscrew with ball bearings Material: Steel, Brass Markings: SOLON / DRGM 152004 Remark: look also at


	D.R.G.M. No. 152 292 Mar. 29, 1901 Johan Wolters, Düsseldorf Description: Corkscrew with hinge jointed bar and sliding ring to lock and unlock the spring barrel. Material: Steel, Wood Markings: none Remark:


	D.R.G.M. No. 172 253 March 03, 1902 Paul Honigbaum, Landshut Description: A corkscrew with two lever arms hinges connected to the neck ring. Material: steel Markings: D.R.G.M. 172253 Geha Remark:


	D.R.G.M. No. 178 437 June 12, 1902 and June 10, 1905 Gotl. Theodor Fischer, Unterschönau Description: Corkscrew with crab piece that engages a recess in the top of the neck of the frame when the handle is turned Material: Steel Markings: none Remark:


	D.R.G.M. No. 182 562 Aug. 14, 1902 W. Sommers, Schmalkalden Description: Corkscrew with a catch inside the frame to engage two pins attached to the shaft, Material: Steel, Wood Markings: none Remark:


	D.R.G.M. No. 184 844 Sep. 17, 1902 G. H. Usbeck, Steinbach-Hallenberg Description: Framed corkscrew with two hook-shaped implements to lock the frame to the shaft. Material: Steel, Wood Markings: none Remark:


	D.R.G.M. No. 194 123 Feb. 07, 1903 Müller Und Schmidt, Solingen Description: Several tools that can be locked inside a handle. Material: Steel, wood Markings: D.R.G.M. 194123 spinning arrow Symbol Remark:

new


	D.R.G.M. No. 206 878 July 17, 1903 W. Neues, Oberschönau Description: Corkscrew with revolving frame and spring assist. Material: Steel, wood Markings: D.R.G.M. N^o 206878 Remark:


	D.R.G.M. No. 223 103 Mar. 31, 1904 Gustav Kürschner, Schmalkalden Description: Spring barrel with a pin attached to the shaft. The pin turns in the loose upper windings of the barrel. Material: Steel, Wood Markings: none Remark:


	D.R.G.M. No. 229 956 June 25, 1904 Wesche & Ruppelt, Zella St. Blasii Description: Pair of champagne nippers with a lead cutter attached to the ends of the arms of the nippers. Material: Steel Markings: none Remark:


	D.R.G.M. No. 289 787 July 16, 1906 Georg Usbeck, Steinbach-Hallenberg Description: Spring barrel corkscrew with locking device Material: Steel, wood Markings: D.R.G.M. Remark:


	D.R.G.M. No. 310 322 April 24, 1907 Böntgen und Sabin, Solingen Description: Case with several tools. The tools can be attached in two ways to the handle: at one end or in the middle. Material: Steel, aluminum, wood, leather Markings: D.R.G.M. 310322 Sabina Remark:


	D.R.G.M. No. 346 678 July 01, 1908 Georg Hermann Usbeck Steinbach-Hallenberg Description: Corkscrew with split barrel and india rubber ring. Material: Steel, wood Markings: ORIGINAL D.R.G.M. Remark: The two india rubber ring halves are missing.


	D.R.G.M. No. 354 940 Oct. 15, 1908 Gustav Twellsiek, Solingen Description: Corkscrew frame made from tin. Material: Steel, Wood Markings: none Remark:


	D.R.G.M. No. 397 282 Oct. 04, 1909 Fa. Gg. Herrmann Usbeck, Steinbach-Hallenberg i. Th. Description: Corkscrew with steel ring bearings. Material: Steel Markings: Monopol D.R.G.M. Remark:


	D.R.G.M. No. 402 623 Dec. 01, 1909 Otto Voigt, Lübeck Description: Corkscrew with locking device at one end of the handle Material: Steel, india rubber Markings: IDEAL Remark:


	D.R.G.M. No. 405 690 Dec. 23, 1909 Fa. Gg. Hermann Usbeck, Steinbach-Hallenberg i. Th. Description: Corkscrew with ball bearings and a split frame. Material: Steel Markings: Monopol 117 D.R.G.M. Remark:


	D.R.G.M. No. 407 605 Jan. 6, 1910 Gustav Twellsiek, Solingen Description: The shoulder of the frame consists of two parts. Material: steel, wood Markings: D.R.G.M. Remark:


	D.R.G.M. No. 869 093 March 11, 1924 Richard Wielpütz, Solingen Description: Can opener with corkscrew. Material: Steel Markings: PATHOS IDEAL D.R.P. Remark: Wielpütz obtained the patent No. 219 624 for this design at April 28, 1924

new


	D.R.G.M. No. 927 670 September 02, 1925 Fa.Gustav Mössner, Offenbach Description: Funnel combiened with a sheathed corkscrew. Material: Brass, steel Markings: D.R.G.M. 927670 Made in Germany Remark:


	D.R.G.M. No. 930 900 Nov. 04, 1925 Gerhard Frings, Köln Description: Bar corkscrew Material: Steel, Wood Markings: HEKTOR 1 F.u C. 118 Remark:


	D.R.G.M. No. 958 928 Jul. 22, 1926 Theodor Kämpf, Steinbach-Hallenberg i. Th. Description: Corkscrew with ball bearings and sliding frame. Material: Steel, Wood Markings: RECORD D.R.G.M. Remark:


	D.R.G.M. No. 1 021 815 January 17, 1928 Fa. Kaspar Fr. Kirchner, Steinbach-Hallenberg i. Th. Description: Pocket corkscrew with crown cork opener. Material: Steel Markings: D.R.G.M. Germany Remark: with leather pouch


	D.R.G.M. No. 1 166 049 Mar. 14, 1931 Robert Kirchner, Steinbach-Hallenberg i. Th. Description: Waiters' friend with cap lifter and can opener Material: Steel Markings: Standard D.R.G.M. Remark: Shown in several German catalogues about 1930-1935


	D.R.G.M. No. 1 242 981 Aug. 29, 1932 Georg Hermann Usbeck, Steinbach-Hallenberg i. Thür. Description: Extractor with two prongs and sheath. Material: Steel, Springsteel, Brass Markings: D.R.G.M. "So-So" Made in Germany Remark:


	D.R.G.M. No. 1 242 981 Aug. 29, 1932 Georg Hermann Usbeck, Steinbach-Hallenberg i. Thür. Description: Extractor with two prongs and sheath. Material: Steel, Springsteel, Brass Markings: Ah-ha Remark:


	D.R.G.M. No. 1 246 839 Sep. 24, 1932 G. Usbeck, Steinbach-Hallenberg Description: Framed corkscrew with spring assist. Material: Steel, Wood Markings: NEUE HERCULES MIT KORK AUSSTOSSER D.R.G.M. Germany Remark: Made with and without caplifter


	D.R.G.M. No. 1 246 839 Sep. 24, 1932 G. Usbeck, Steinbach-Hallenberg Description: Framed corkscrew with spring assist Material: Steel, Wood Markings: D.R.G.M. Kapselheber Caplifter Germany BACCHUS with corkexpeller Gg. HERM.USBECK GEGR. 1879 STEINBACH-HALLENBERG Remark:


	D.R.G.M. No. 1 308 467 May 28, 1934 Firma Adolf Menz Wwe., Benshausen i. Th. Description: Locking mechanism for corkscrew frame. Material: Steel, Wood Markings: none Remark: Registration is only for the locking mechanism.


	D.R.G.M. No. 1 331 002 February 16, 1935 Theodor Kämpf, Steinbach-Hallenberg Description: Corkscrew with ball bearings. Material: steel, wood Markings: D.R.G.M. CORSO Remark:


	D.R.G.M. No. 1 385 490 August 27, 1936 F.C. vom Hau, Solingen Description: Corkscrew with double helix. Material: steel, wood Markings: D.R.G.M. Remark:


	D.R.G.M. No. 1 483 417 Dec. 1, 1939 Fritz Müchler, Mettmann, Rhineland Description: Corkscrew Material: Steel, Wood Markings: MARO D.R.G.M. Remark:


	D.R.G.M. No. 1 517 988 Feb. 21, 1942 Grete Kahlenberg, geb. Simon, Hagen Description: Pocket corkscrew. Material: Wood, Steel Markings: none Remark: Not an Original, but made according to Kahlenberg's principles.


	D.R.G.M. No. 1 523 994 June 1, 1942 Fritz Müchler, Mettmann, Rhineland Description: Corkscrew with spring assist Material: Steel, Aluminum Markings: MARO D.R.G.M. Remark:


	D.R.G.M. No. 1 526 501 Nov. 12, 1942 Richard Menz, Oberschönau near Steinbach-Hallenberg Description: Corkscrew Material: Steel, wood Markings: D.R.G.M. Remark: see abstract of Ferd. Peters book German Corkscrew Registrations D.R.G.M. 1891 - 2000 Page 139


	D.R.G.M. No. Date granted DRGM Holder name Description: Material: Steel, Brass, Plastic Markings: D.R.G.M. Germany Remark: At this time no classifying possible


	D.R.G.M. No. Date granted DRGM Holder name Description: Material: Steel, Wood Markings: DRGM Remark: At this time no classifying possible


	D.R.G.M. No. Date granted DRGM Holder name Description: Material: Steel, Plastic Markings: D.R.G.M. Germany MIGNON Remark: At this time no classifying possible


	D.R.G.M. No. Date granted DRGM Holder name Description: Material: Steel, Inida rubber Markings: D.R.G.M. Germany MONOPOL UNIVERSAL Remark: At this time no classifying possible


	D.R.G.M. No. Date granted DRGM Holder name Description: Material: Steel, wood Markings: COLUMBUS FRÜHER D.R.P. 70879 Remark: At this time no classifying possible


	D.R.G.M. No. Date granted DRGM Holder name Description: Material: Steel, brass Markings: D.R.G.M. Germany Remark: At this time no classifying possible


	D.R.G.M. No. Date granted DRGM Holder name Description: Material: Steel Markings: DRGM Remark: At this time no exact classifying possible


	D.R.G.M. No. Date granted DRGM Holder name Description: Material: Steel Markings: DRGM Remark: At this time no classifying possible


	D.B.G.M. No. 1 602 755 July 29, 1949 Karl Breithoff Söhne, Solingen Description: Framed corkscrew. Material: Steel, wood Markings: Symbol (Sun) Carl Schlieper, Solingen-Germany Remark: India rubber ring to protect the bottle neck is missing


	D.B.G.M. No. 1 605 827 Oct. 10, 1949 Richard Wielpütz, Solingen Description: Lever corkscrew Material: Steel Markings: PATHOS-EXTRA D.R.G.M. Remark:


	D.B.G.M. No. 1 650 463 December 01, 1952 Ed. Wüsthoff Dreizackwerk, Düsseldorf Description: Corkscrew. Material: Steel, plastic Markings: D.B.G.M. Dreizack-Symbol Remark: TRINKT SINALCO advertising with leather pouch


	D.B.G.M. No. 1 732 395 April 30, 1956 Paul und Helmut Vitz, Velbert Description: Anchor-shaped corkscrew with thermometer. Material: Steel, bronce, plastic, mercury Markings: none Remark:


	D.B.G.M. No. 1 896 390 Dec. 24, 1962 Gebrüder Streicher, Denkingen Description: Air injecting cork extractor Material: Steel, Plastic Markings: EMIDE Remark:


	D.B.G.M. No. 1 911 407 Oct. 20, 1964 Franz Tschappu, Zürich, Switzerland Description: Pneumatic cork puller Material: Steel, Plastic Markings: corky + Patent Pat. pend. Remark:


	D.B.G.M. No. 7 044 451 Dec. 2, 1970 Walter Bosse, Iserlohn, Germany Description: Figure shaped corkscrew and cap lifter Material: Steel, brass? Markings: none Remark: see abstract of Ferd. Peters book German Corkscrew Registrations D.R.G.M. 1891 - 2000 Page 157

table of content